![anile-8r chirp programming anile-8r chirp programming](https://arcanecode.files.wordpress.com/2019/04/image-11.png)
- Anile 8r chirp programming full size#
- Anile 8r chirp programming full#
- Anile 8r chirp programming software#
- Anile 8r chirp programming code#
- Anile 8r chirp programming series#
The UV-82HP now includes all of the above features in one package. Prior models provided Burst for 1750Hz only. This is not to be confused with CTCSS or DCS. – An expanded feature added is R-Tone, a repeater tone for those requiring a 1000, 1450, 1750 or 2000Hz audible tone for access. – Next came the 8W F8HP, the first of the high power Baofengs. – Next came the UV82C which included options to synchronize the Dual PTT function to emulate a Single PTT, and the ability to lock out the VFO to prevent accidental field programming. – The original UV82 took a traditional UV5R, and added design features such as an upgraded case and Dual PTT switch. ( comparison) – The receiver sensitivity is still excellent.
Anile 8r chirp programming software#
– Alpha tags can be added with the required software below. – Live On-the-Air audio reports are excellent. Previously only available with the commercial version (UV82C) – The Dual PTT button is now an option that can be turned off. – VHF output on the test unit clocks in at 7.3W with UHF at 6.0W It also is built using the latest generation chipset. The radio sports all traditional features of the UV82 design, with the larger keypad buttons and the zero at the bottom of the number pad where it belongs, etc.
![anile-8r chirp programming anile-8r chirp programming](https://m.media-amazon.com/images/I/51nTvlP0uML._SY445_.jpg)
Anile 8r chirp programming series#
The new UV-82HP is not just a power upgrade, but a combination of all major features of both the UV82 and UV5R series in one package. This amplifier is Part 90 certified and definitely worth considering.
![anile-8r chirp programming anile-8r chirp programming](https://geek-ff8b.kxcdn.com/wp-content/uploads/2015/02/chirp-stock-config.jpg)
Anile 8r chirp programming full#
I was glad to see someone finally develop what is a full featured mobile amplifier capable of DMR as well as all other modes including C4FM and D-Star that is small enough to mount in the car, boat, and on top of your computer.
![anile-8r chirp programming anile-8r chirp programming](https://arcanecode.files.wordpress.com/2019/04/image_thumb-4.png)
Operating my handheld in the low power position, I still get 22W out on UHF and my handheld’s battery life remains excellent, but high power gives me a solid 39W. Whatever is in my handheld is what I operate in the mobile
Anile 8r chirp programming code#
No duplicate programming or code plugs are necessary. Depending on your radios antenna jack, you may need to pickup an SMA-M to SMA-M adapter.Īll channel selection and volume adjustments are done using the handheld. I use an Anytone D868 on DMR as well as analog with the hookup diagrammed below. The power included power cable is compatible with handhelds using the standard two pin Kenwood style connector, such as an MD380, D868, GD77, UV5R, F8HP, UV82, etc.
Anile 8r chirp programming full size#
This allows me to use the full size hand microphone as well as connecting the four watt audio amp powering the speaker. The 3′ RF cable to attach the radio to the amp, and the control cable. You could add a Spkr/Micr to the handheld, but you would still be bypassing some of the best features. The simplest configuration is using the included RF cable to attach the radio to the amp. This is due to the circuit switching design of DMR Tier II and P25 Phase 2. These amplifiers will only operate within their specified VHF or UHF range. This will allow you to run straight through directly to the antenna without power amplification on that band. To operate VHF through the UHF (U25) amplifier, or UHF through the VHF (V25) amplifier, simply power off the amplifier. Note: The V25 D and U25 D were designed to include DMR Tier II (TDMA) and P25 Phase 2 along with all other modes. I was curious to see the internal layout of the amp and to no surprise, there was a 5/8″ finned heat sink spanning the entire length and width of the case along with air vent along the back of the enclosure. The basic frame measures 4.6″W x 1.3″H x 5.5″D (excluding the SO-239) and weighs in at 26oz. This is low enough for the amp to be powered by the 10A accessory jack in your vehicle. The maximum current drain from my 13.6V 30A power supply was just under 6A. The power was tested using the analog side of both into a calibrated Bird Termaline wattmeter. The VHF V25 (non TDMA) and the U25D for UHF DMR. I tested the power on two different models. Although the driving force was my DMR handheld sitting in my cup holder, the transmit audio was that of the included hand microphone and the receiver audio out was coming through the built in speaker driven by a four watt audio amplifier. Although they can function as a simple ‘In and Out’ power amp, this is about as close to a full mobile as you can get. I found these to be much more than a typical power amplifier. – 3′ Interface Control Cable (Kenwood K1 connectors) Note: This review was done using an Anytone D868UV on both DMR and analog. The D series are true TDMA Tier2 DMR amplifiers. It performs more like a mobile than it does a power amp. The recently announced BTech Digital and Analog amplifier series puts a whole new spin on mobile operation.